Power Converter
Convert power between watts, kilowatts, horsepower, BTU per hour, refrigeration tons and dBm instantly — with exact factors.
Convert Power
Popular conversions
How to Use the Power Converter
Enter a value, pick the starting unit and the target unit, and the result appears instantly — no button press is needed. Results update live while typing. The ⇄ button swaps the two units, the copy button puts the full sentence ("1 kW = 1.341022 hp") on the clipboard, and each row of the popular-conversions table loads that conversion into the calculator with one click. Note that dBm is logarithmic, not linear: doubling the watts adds about 3 dBm, and converting zero or negative power to dBm is not defined, so the calculator shows a friendly message instead of a meaningless number in that case.
The converter covers ten units: milliwatts, watts, kilowatts, megawatts, gigawatts, mechanical horsepower, metric horsepower, BTU per hour, refrigeration tons, and dBm. The watt is the SI unit. One mechanical horsepower is exactly 745.699872 watts; one metric horsepower is 735.49875 watts. A refrigeration ton — the cooling capacity that freezes one short ton of ice in 24 hours — equals 12,000 BTU/hr, or 3,516.8525 watts. dBm measures power relative to one milliwatt: 0 dBm is 1 mW, 10 dBm is 10 mW, 20 dBm is 100 mW, and 30 dBm is 1 W.
Power Conversion Formulas
Every linear power conversion is a two-step multiplication: convert the starting unit into watts, then divide by the target unit's size in watts. dBm conversions go through milliwatts with a logarithm instead.
The 1.341022 factor for kW to horsepower comes from 1,000 ÷ 745.699872. The BTU/hr factor 3.412142 comes from 3,600 ÷ 1,055.05585262 — the same 3,412.141633 that converts kWh to BTU, because one watt running for one hour is one watt-hour. A refrigeration ton is exactly 12,000 BTU/hr by definition, which is why 1 RT = 3.516853 kW. For dBm, remember the 3 dB rule: +3 dBm doubles the power, −3 dBm halves it, and +10 dBm multiplies power by ten.
Worked Example: A 2-Horsepower Motor in Kilowatts and BTU/hr
Example — Motor power
A workshop motor is rated at 2 mechanical horsepower. A European replacement is rated in kilowatts, and the heating load it adds to the room is measured in BTU per hour.
Step 1: Convert to watts: 2 × 745.699872 = 1,491.399744 W.
Step 2: Convert to kilowatts: 1,491.399744 ÷ 1,000 = 1.4914 kW.
Step 3: Convert to BTU/hr: 1,491.399744 × 3.412142 = 5,088.8 BTU/hr of heat to remove from the room.
Step 4: In metric horsepower: 1,491.399744 ÷ 735.49875 = 2.0276 metric hp — slightly higher, because a metric horsepower is a slightly smaller unit.
The 1.4% gap between mechanical and metric horsepower is the reason the two are listed separately: a "2 hp" motor means different watts depending on which horsepower the label uses.
Common Power Conversions
| Conversion | Result | Notes |
|---|---|---|
| 1 kilowatt | 1.341022 hp | Mechanical horsepower |
| 1 horsepower | 745.699872 W | Exact; mechanical |
| 1 metric horsepower | 735.49875 W | Also called PS, CV, ch |
| 1 kilowatt | 3,412.141633 BTU/hr | Heating load |
| 1 refrigeration ton | 3.516853 kW | 12,000 BTU/hr |
| 1 megawatt | 1,341.022089 hp | Small power plant |
| 0 dBm | 1 mW | Reference level |
| 10 dBm | 10 mW | Wi-Fi radio range |
| 20 dBm | 100 mW | Common Wi-Fi transmit power |
| 30 dBm | 1 W | Cellular handset peak |
All Power Units
| Unit | Symbol | In watts | Used for |
|---|---|---|---|
| Milliwatt | mW | 0.001 | Radio signals, lasers |
| Watt | W | 1 | SI base unit |
| Kilowatt | kW | 1,000 | Appliances, motors |
| Megawatt | MW | 1,000,000 | Power plants |
| Gigawatt | GW | 1,000,000,000 | National grids |
| Horsepower (mechanical) | hp | 745.699872 | Engines (US/UK) |
| Horsepower (metric) | hp | 735.49875 | Engines (EU) |
| BTU per hour | BTU/hr | 0.29307107 | Heating, cooling (US) |
| Refrigeration ton | RT | 3,516.8525 | Air conditioning |
| Decibel-milliwatt | dBm | logarithmic | Radio, fiber optics |
Power vs Energy: The Distinction Behind the Units
Power is the rate at which energy is used; energy is the total. A 100-watt bulb uses 100 watts of power at every instant, and after 10 hours it has used 1 kilowatt-hour of energy. The electricity meter charges for kilowatt-hours, while the bulb box states watts. Confusing the two is the most common error in this field: "a 2 kW heater" describes power, "2 kWh per day" describes energy. Air conditioners add a second confusion, because their capacity is often stated in BTU/hr (a power unit) while their consumption is stated in watts — a 12,000 BTU/hr unit (one refrigeration ton) typically draws about 1,000–1,500 watts of electricity, and the gap between those two numbers is the efficiency of the machine.
Horsepower has its own history: James Watt defined it in the 1780s as the rate at which a horse could lift 550 pounds one foot in one second — 550 foot-pounds per second, which works out to 745.699872 watts. Metric horsepower, defined later as 75 kilogram-force meters per second, is 735.49875 watts. The two differ by about 1.4%, so European car brochures (metric hp, often written PS) and American ones (mechanical hp) are not directly comparable without converting. Boiler horsepower and electrical horsepower are further variants, which is why this converter lists only the two in common use.
Common Mistakes When Converting Power
- Mixing mechanical and metric horsepower. 100 metric hp is 73.55 kW; 100 mechanical hp is 74.57 kW. The 1 kW gap matters when sizing motors and comparing car specs.
- Treating dBm as linear. 20 dBm is not twice 10 dBm — it is ten times the power (100 mW vs 10 mW). Every 3 dBm doubles power; every 10 dBm multiplies it by ten.
- Confusing BTU and BTU/hr. BTU measures energy; BTU/hr measures power. An air conditioner rated 12,000 BTU/hr delivers 12,000 BTU of cooling every hour — the "/hr" is not optional.
- Reading refrigeration tons as weight. A "3-ton air conditioner" weighs nothing like three tons; the ton is a cooling-capacity unit equal to 12,000 BTU/hr.
- Converting watts to volt-amperes directly. Watts are real power; volt-amperes are apparent power. They are equal only when the power factor is 1, as with a pure resistive heater. Motors and electronics need the power factor to convert.
For everyday use, three anchors cover most conversions: 1 kW ≈ 1.34 hp, 1 kW ≈ 3,412 BTU/hr, and 30 dBm = 1 W. A typical hair dryer draws about 1,500 W (2 hp), a laptop charger about 65 W, and a home Wi-Fi router transmits at roughly 20 dBm (100 mW) — numbers that make the scale of each unit concrete before converting.
My saved numbers reuse them in any calculator
Save a number once — like your rent or hourly rate — then just type its name instead of the number, in any calculator here. You can also type formulas like 5000 * 1.1 right into any box.
Saved only in this browser — nothing is sent to us.
Frequently Asked Questions
How many watts are in 1 horsepower?
1 mechanical horsepower = 745.699872 watts exactly. 1 metric horsepower is smaller: 735.49875 watts.
How many horsepower are in 1 kW?
1 kW = 1.341022 mechanical horsepower. The factor is 1,000 ÷ 745.699872.
What is dBm?
dBm measures power relative to 1 milliwatt on a logarithmic scale: 0 dBm = 1 mW, 10 dBm = 10 mW, 20 dBm = 100 mW, 30 dBm = 1 W.
How many BTU/hr are in 1 kW?
1 kW = 3,412.141633 BTU/hr. The factor is the same 3,412.141633 that converts kWh to BTU, because 1 W for 1 hour is 1 Wh.
What is a refrigeration ton?
One refrigeration ton (RT) is a cooling capacity of 12,000 BTU/hr, equal to 3.516853 kW. It comes from the energy needed to freeze one short ton of ice in 24 hours.
What is the difference between watts and volt-amperes?
Watts are real power; volt-amperes are apparent power. They are equal only when the power factor is 1, as with a pure resistive heater.