Baking Pan Converter

Convert any baking recipe to the pan you actually own — exact batter scaling, fill-level check, temperature and time adjustments, plus a scaled ingredient list.

Calculate

1. Your pans

Volumes are standard capacities; bundt and muffin areas are effective footprints. Metric? 1 inch = 2.54 cm.

Same pan on both sides gives a scale factor of exactly 1× — a quick way to sanity-check the math.

2. Scaling method

Volume compares how much batter each pan holds — right for almost every swap. Area keeps the batter at the same thickness — right for thin layers between same-height pans.

Most cake recipes fill the pan about two-thirds full. This drives the fill warning for your new pan.

3. Oven settings (optional)

Leave both oven fields blank to skip the temperature and time adjustment.

Times adjust with batter depth: deeper batter needs longer at a lower temperature.

4. Your ingredients

Type each ingredient with its amount and unit — every one scales by the same factor. Accepts expressions like 1/2 or 2+1/4.

A recipe written for a 9" round cake pan uses 1.84× the batter in a 9×13" rectangular pan — multiply every ingredient by 1.84.
1.84× scale factor

The new pan

Batter in the new pan10.8 cups
Fill level of the new pan66.7%
Batter depth vs the recipe pan+0%
⚠️ Big change: scaling past 1.5× (or under 0.5×) makes layers, rise and crust behave differently even with the amounts right — leavening especially stops scaling linearly. Trust the toothpick, not just the math.

Adjusted oven settings

Temperature350°F → 350°F
Bake time35 min → 35 min

The batter depth barely changed, so the original temperature and time should hold.

Scaled ingredients

IngredientOriginalScaled
All-purpose flour2 cups3⅝ cups
Granulated sugar1.5 cups2¾ cups
Unsalted butter0.5 cups⅞ cups
Large eggs2 count3½ count
Baking powder2 tsp3½ tsp
Whole milk1 cups1⅞ cups

Cups snap to kitchen-friendly eighths (2¾, 1⅞). For eggs, round to the nearest half — beat one and measure. Leavening past 1.5×: add a touch less than the math says.

How to Use the Baking Pan Converter

Start by choosing the recipe pan — the pan size your recipe was written for. Then choose the pan you have — the one actually in your kitchen. Pick a scaling method: volume is right for almost every swap because it compares how much batter each pan holds, while area keeps the batter at exactly the same thickness and suits thin layers between same-height pans. Tell the calculator roughly how full the recipe pan is (most cake recipes fill the pan about two-thirds full), then type your ingredients with their amounts and units — every line scales by the same factor. If your recipe lists an oven temperature and bake time, enter them too and the calculator adjusts both for the new batter depth. Everything updates live: the scale factor, the fill warning, the adjusted settings, and your scaled ingredient list, which you can copy or print for the kitchen counter.

Area vs Volume: Which Scaling Mode Should You Pick?

Both modes compare the two pans, but they answer slightly different questions. Volume mode divides the new pan's total capacity by the old pan's: a 9-inch round holds about 8.8 cups and a 9×13-inch pan about 16.2, so the factor is 16.2 ÷ 8.8 = 1.84. This is the mode to use whenever the pans are different heights — a loaf pan is 3 inches deep while a cake pan is 2, so area alone would mislead you. Area mode divides the footprints: 117 square inches ÷ 63.6 = 1.84 for the same example. Use it for thin batters between same-height pans, where you want the layer to sit at exactly the same thickness — sheet cakes, brownies, bar cookies. The good news: for standard 2-inch-deep cake pans (rounds, squares, 9×13s) the two modes give the same number, because equal depths cancel out. When they disagree, trust volume for batter amounts and let the depth comparison guide the baking time.

Worked Example: 9-Inch Round to 9×13

Your recipe makes one 9-inch round layer, baked 35 minutes at 350°F. You want a 9×13-inch sheet cake instead. The converter compares the pans — 63.6 square inches versus 117 — and returns a scale factor of 1.84×. Every ingredient multiplies by 1.84:

IngredientOriginalScaled (×1.84)
All-purpose flour2 cups3⅝ cups
Granulated sugar1½ cups2¾ cups
Unsalted butter½ cup⅞ cup
Large eggs23½
Baking powder2 tsp3½ tsp
Whole milk1 cup1⅞ cups

Cups snap to kitchen-friendly eighths, so nothing needs a calculator at the counter. Because both pans are 2 inches deep and the batter depth barely changes, the temperature and time stay at 350°F and 35 minutes — the converter confirms this rather than making you guess. And 3½ eggs is honest: beat three eggs plus half of a fourth, and measure.

Pan Size Reference Chart

These are the areas, capacities and the share of a 9×13-inch recipe each pan holds at the same batter depth. Two pans worth remembering: a 9-inch round (63.6 sq in) is nearly identical to an 8-inch square (64 sq in), and two 9-inch rounds (127 sq in) are close to one 9×13 (117 sq in).

PanArea (sq in)Volume (cups)Share of 9×13
6" round28.33.90.24
8" round50.37.00.43
9" round63.68.80.54
10" round78.510.90.67
12" round113.115.70.97
8×8" square64.08.90.55
9×9" square81.011.20.69
9×13" rectangular117.016.21.00
9×5" loaf45.09.40.58
10" Bundt (12-cup)—*12.00.74
12-cup muffin pan—*4.50.28

*Bundt and muffin pans are shaped, so the converter compares them by volume (fill each with water to the rim and count the cups if you want to check your own pan).

How Pan Size Changes Baking Time and Temperature

Bake time follows batter depth, not the scale factor. When you scale properly, the depth stays the same and the time barely moves — that is the whole point of scaling by the pan ratio. The temperature only needs to change when the depth changes by a meaningful amount:

SituationTemperatureTime
Batter depth about the same (±15%)Keep itKeep it
Batter sits deeper (smaller pan)−25°FLonger — grows with the depth ratio
Batter sits shallower (larger pan)+25°FShorter — start checking 5 min early

A deeper layer needs a cooler oven so the middle cooks before the edges burn; a shallower layer needs less time, and a slightly hotter oven keeps it from drying out. Either way, the adjusted time is a starting estimate: start checking about 5 minutes early and go by a toothpick or an internal temperature, never the clock alone. Never change the temperature by more than 25°F for a pan swap — past that, you are fighting the recipe instead of converting it.

How Full Should You Fill the Pan?

Between half and two-thirds full — never more. Batter rises as it bakes, and a pan filled past two-thirds spills over the rim and bakes raw in the middle while the top burns. The converter estimates the fill of your new pan from the scaled batter and flags anything past the two-thirds line. If you see the overflow warning, you have three honest options: use a bigger pan, split the batter across two pans, or hold some batter back for cupcakes. The other extreme matters too: batter sitting under one-third of the pan bakes thin, fast and dry. Thin layers are not failures — a 9×13 of brownies is supposed to be shallow — but they need an earlier check, not the original time.

Scaling Eggs, Leavening and Spices

Most ingredients scale linearly, but three categories need judgment. Eggs come in whole units: multiply, then round to the nearest half egg — beat an egg, pour off half by eye, and move on. A recipe calling for 2 eggs at 1.84× wants 3.68, so use 3½ (or 4 if you like a richer crumb). Baking powder and baking soda scale with the recipe up to about 1.5×, but past that leavening stops behaving linearly — too much leaves a metallic, soapy taste. Add a touch less than the math says and trust the rise. Spices, salt, vanilla and other flavorings technically scale too, but taste beats math: scale them, then adjust to your palate, because a doubled recipe rarely wants exactly doubled salt. Yeast is its own case — it scales with flour weight, not pan volume, and rising times barely change with quantity, so keep the rise schedule and watch the dough, not the clock.

US and Metric Equivalents

The pan database uses US inches because American recipes do, but the math is unit-free. Quick references: 1 inch = 2.54 cm, so a 9-inch round is about 23 cm and a 9×13-inch pan about 23×33 cm. 1 US cup = 236.6 ml, and a stick of butter (½ cup) is 113 g. The ingredient scaler accepts milliliters and grams directly, so a metric recipe scales without any conversion step — just enter the amounts as written and pick the right unit.

Common Pan Swaps That Need No Math

Some swaps are close enough to bake as-is. A 9-inch round and an 8-inch square differ by about 1% — use the same batter, same time, no scaling. Going from an 8-inch round to a 9-inch round is a 1.27× change in area: close enough that most cakes work with the original amounts, just a slightly thinner layer — check 5 minutes early. Two 8-inch rounds hold about the same as one 9-inch square (100 vs 81 sq in is 1.23×, slightly thicker — add a few minutes). And the famous one: a 12-cup muffin pan holds roughly 4.5 cups of batter, so a 9-inch round recipe at 1.84× fills it with room to spare — or scale any cake recipe by about 0.5× for a dozen cupcakes and bake 18–22 minutes.

Troubleshooting: Sunken Middle, Dry Edges, Overflow

Sunken middle usually means the batter sat deeper than the recipe intended — too much batter for the pan, or the oven opened too early. Scale down to the pan ratio and keep the door shut for the first three-quarters of the bake. Dry, overbaked edges with a fine middle mean the layer was too thin for the original time — a larger pan needs an earlier check, not the full time. Overflow means the pan was over two-thirds full: the batter had nowhere to rise. Put a baking sheet under the pan next time as insurance, but fix the cause — less batter or a bigger pan. A cracked, domed top often means the oven was too hot for the depth; the 25°F reduction for deeper batters exists to prevent exactly this. When in doubt, an instant-read thermometer settles it: most cakes are done at 200–210°F in the center, custards and cheesecakes at 150–165°F.

My saved numbers reuse them in any calculator

Save a number once — like your rent or hourly rate — then just type its name instead of the number, in any calculator here. You can also type formulas like 5000 * 1.1 right into any box.

    Saved only in this browser — nothing is sent to us.

    Baking times and temperatures are estimates — start checking 5 minutes early and go by doneness, not the clock.

    Frequently Asked Questions

    How do I convert a recipe from one pan size to another?

    Divide the new pan's size by the old pan's size and multiply every ingredient by the result. For example, a 9-inch round pan has about 63.6 square inches and a 9×13-inch pan has 117, so 117 ÷ 63.6 = 1.84 — multiply everything by 1.84. This calculator does that math for 17 common pans, in either volume or area mode.

    Should I scale by area or by volume?

    Use volume when the two pans are different heights — it compares how much batter each pan actually holds, which is almost always the right choice. Use area when both pans are the same height and you want the batter to sit at exactly the same thickness, like moving a thin sheet cake between two shallow pans. For most round-to-round or round-to-rectangle swaps the two modes agree because standard cake pans are all 2 inches deep.

    Can I bake a 9×13 recipe in two 9-inch round pans?

    Yes. Two 9-inch rounds have a combined area of about 127 square inches versus 117 for the 9×13, so the batter sits about 9% deeper. Scale the recipe by 0.92 per round pan, keep the temperature the same, and bake 5–10 minutes longer, testing the middle with a toothpick.

    Do I need to change the oven temperature when I change pan size?

    Only when the batter depth changes. If the batter sits deeper in the new pan (a smaller pan), drop the oven temperature by 25°F and bake longer so the middle cooks before the edges burn. If it sits shallower (a larger pan), keep the temperature and start checking 5–10 minutes early. If the depth is about the same, change nothing — the original time should hold.

    How full should I fill a cake pan?

    Fill cake pans between half and two-thirds full — never more than two-thirds. Batter rises as it bakes, and an overfilled pan spills over the edge and bakes raw in the middle. The calculator estimates your new fill level and warns you if the scaled batter would cross the two-thirds line or sit under one-third, which bakes dry.

    What happens if I do not scale the ingredients?

    The batter depth changes, and depth decides the bake. Pouring the same batter into a larger pan makes a thinner layer that bakes faster and dries out if you use the original time; pouring it into a smaller pan makes a deeper layer that stays raw in the middle while the top burns. Scaling by the pan ratio keeps the depth — and therefore the bake — consistent.

    How do I scale eggs and baking powder?

    Eggs: multiply, then round to the nearest half egg — beat an egg, measure half by volume, and use what you need. Baking powder and baking soda scale with the recipe up to about 1.5×; past that, leavening stops behaving linearly, so add a little less than the math says and rely on the toothpick test. The calculator's extreme-scaling warning (past 1.5× or under 0.5×) exists exactly for this reason.

    Is an 8-inch square pan the same as a 9-inch round?

    Near enough to swap with no changes: an 8-inch square has 64 square inches and a 9-inch round has about 63.6 — a ratio of 1.01. Same rule: round pans always hold less than a square of the same width, because a square has about 27% more area than a round with the same measurement.

    Related Calculators

    Last reviewed: November 4, 2026 · Formulas verified for accuracy.