Electrical Converter
Convert between amps, watts, volts, kW, kVA, joules, watt-hours, electronvolts and mAh in one place — with the voltage, power factor and time each pair needs.
Convert Electrical Units
Extra inputs — only the ones your conversion needs
Fill in the highlighted fields. The rest can stay blank — they are ignored for this pair of units.
Popular conversions
How to Use the Electrical Converter
Enter a value, pick the starting unit and the target unit, and the result appears instantly — no button press is needed. Unlike a simple unit converter, electrical quantities are linked by physics, not just by scale: converting amps to watts needs the voltage, converting watts to volt-amperes needs the power factor, and converting joules to watts needs a time. The fields your conversion needs are highlighted automatically — fill those in and leave the rest blank. The ⇄ button swaps the two units, the copy button puts the full sentence ("12 A = 1,440 W") on the clipboard, and each row of the popular-conversions table loads that conversion into the calculator with one click.
The converter covers thirteen units in one place: amps, milliamps, volts, watts, kilowatts, volt-amperes, kilovolt-amperes, joules, kilojoules, watt-hours, kilowatt-hours, electronvolts and milliamp-hours. It replaces 46 separate single-pair pages: every pair in the list below works, in both directions, with the right extra inputs asked for each time.
Electrical Conversion Formulas
Four relations do almost all the work. Ohm's law links voltage, current and resistance; the power law links power, voltage and current; energy is power sustained over time; and charge is current sustained over time. Apparent power (VA) and real power (W) differ by the power factor.
The electronvolt deserves a note: it is the energy one electron gains crossing one volt, so converting eV to volts needs a charge (one electron's worth), and converting eV to joules is a straight multiplication by 1.602176634×10⁻¹⁹. Milliamp-hours are charge, not energy — a 5,000 mAh battery holds 18,000 coulombs, and its energy in watt-hours is that charge times its voltage.
Worked Example: A 1,500 W Heater on Two Supplies
Example — Heater current, energy and battery equivalent
A 1,500 W space heater runs for 4 hours. Find its current on 120 V and on 230 V, the energy it uses in kWh and joules, and the battery charge that energy represents at 12 V.
Step 1: Current at 120 V: 1,500 ÷ 120 = 12.5 A. At 230 V: 1,500 ÷ 230 = 6.52 A — the same power needs half the current at twice the voltage.
Step 2: Energy: 1,500 W × 4 h = 6 kWh.
Step 3: Energy in joules: 6 × 3,600,000 = 21,600,000 J (21.6 MJ).
Step 4: Charge at 12 V: 21,600,000 ÷ 12 = 1,800,000 C, and in milliamp-hours: 1,800,000 ÷ 3.6 = 500,000 mAh — about a hundred phone batteries.
The example shows why the extra inputs matter: the same 1,500 W is 12.5 A or 6.52 A depending on voltage, and 6 kWh is a fixed energy no matter how you slice it. Any converter that answers "how many amps is 1,500 W?" without asking for voltage is guessing.
Common Electrical Conversions
| Conversion | Result | Notes |
|---|---|---|
| 1 A at 120 V | 120 W | P = V × I |
| 1 A at 230 V | 230 W | P = V × I |
| 1 kW at 230 V, PF 1 | 4.35 A | I = P ÷ V |
| 1 kVA at PF 0.8 | 800 W | P = S × PF |
| 1 kW at PF 0.8 | 1.25 kVA | S = P ÷ PF |
| 1 kWh | 3,600,000 J | Energy |
| 1 Wh | 3,600 J | Energy |
| 1 kW for 1 hour | 1 kWh | Energy = power × time |
| 1 eV | 1.602176634 × 10⁻¹⁹ J | Exact |
| 1 mAh at 5 V | 0.005 Wh | E = Q × V |
| 1,000 mA | 1 A | Current scale |
| 1 kJ | 1,000 J | Energy scale |
Watts, Volt-Amperes and Kilowatt-Hours: The Three Confusions
Watts and volt-amperes look interchangeable and are not. Watts are real power — the energy actually consumed. Volt-amperes are apparent power — voltage times current, regardless of timing. In a purely resistive load like a heater, they are equal. In a motor or a computer power supply, the current lags or leads the voltage, the power factor drops below 1, and the apparent power exceeds the real power. A 1 kVA UPS at power factor 0.8 delivers only 800 W: the other 200 VA sloshes back and forth without doing work, but the wiring still has to carry it.
Kilowatts and kilowatt-hours confuse everyone exactly once. A kilowatt is a rate — how fast energy is used right now. A kilowatt-hour is an amount — that rate sustained for an hour. A 2 kW heater running for 30 minutes uses 1 kWh, not 2 kWh. The bill charges for kWh; the breaker cares about kW (through amps). And joules versus watts is the same distinction in SI units: a joule is an amount of energy, a watt is one joule per second.
Common Mistakes When Converting Electrical Units
- Converting watts to amps without voltage. There is no fixed answer: 1,000 W is 8.33 A at 120 V, 4.35 A at 230 V and 83.3 A at 12 V. Any amps figure quoted without a voltage is meaningless.
- Treating kVA as kW. They are equal only at power factor 1. Sizing a generator in kW when the load is rated in kVA leaves you short by the power factor — 20% short at PF 0.8.
- Confusing kW with kWh. "My heater uses 2 kWh per hour" mixes the two: a 2 kW heater uses 2 kWh in one hour, 1 kWh in half an hour. State the time, or the number is wrong.
- Forgetting time in joules-to-watts. 3,600 J is 1 W over an hour but 3,600 W over one second. Energy divided by time is power — without the time there is no answer.
- Reading mAh as energy. A 5,000 mAh battery at 3.7 V stores 18.5 Wh; the same 5,000 mAh at 12 V stores 60 Wh. Compare batteries in Wh, not mAh, when voltages differ.
- Using eV as a voltage. An electronvolt is energy, not potential: 1 eV is the energy of one electron crossing 1 V. A particle "at 1 eV" has that energy, not a 1-volt potential.
Three anchors cover most conversions: P = V × I, E = P × t, and 1 kWh = 3.6 MJ. A phone charger is about 10–20 W, a kettle about 2–3 kW, a home uses roughly 10–30 kWh a day, and a car battery holds about 1 kWh — numbers that make the scale of each unit concrete before converting.
My saved numbers reuse them in any calculator
Save a number once — like your rent or hourly rate — then just type its name instead of the number, in any calculator here. You can also type formulas like 5000 * 1.1 right into any box.
Saved only in this browser — nothing is sent to us.
Frequently Asked Questions
How many amps is 1000 watts?
It depends on the voltage: I = P ÷ V. At 120 V, 1,000 W draws 8.33 A. At 230 V it draws 4.35 A, and at 12 V it draws 83.3 A. Enter the voltage above and the calculator gives the exact current for your supply.
How do I convert watts to amps?
Divide watts by volts: I = P ÷ V. A 60 W bulb on 120 V draws 0.5 A; the same bulb on 230 V draws 0.26 A. For three-phase loads the formula adds a √3 factor, which this single-phase converter does not cover.
What is the difference between kW and kVA?
kW is real power — the energy actually used. kVA is apparent power — voltage times current. They are equal only when the power factor is 1. At power factor 0.8, 1 kVA delivers 0.8 kW, so a 100 kVA generator supplies 80 kW.
How many joules are in 1 kWh?
Exactly 3,600,000 joules. One kilowatt-hour is 1,000 watts sustained for 3,600 seconds: 1,000 × 3,600 = 3,600,000 J. A watt-hour is 3,600 J by the same reasoning.
How do I convert Wh to mAh?
Divide the watt-hours by the voltage, then multiply by 1,000: mAh = Wh ÷ V × 1,000. A 5 Wh battery at 5 V holds 1,000 mAh; the same 5 Wh at 3.7 V holds 1,351 mAh. The voltage is essential — without it there is no answer.
What is an electronvolt?
The energy one electron gains crossing a potential of one volt: 1 eV = 1.602176634 × 10⁻¹⁹ joules exactly. It is the standard energy unit in particle physics and semiconductor work, where joules would need twenty decimal places.