Electricity Bill Calculator

Your bill is more than usage times rate. Enter the kilowatt-hours from your bill, your rate, the fixed monthly charge and the tax rate, and see every line item — energy, fixed charge, tax and the total — plus what each kilowatt-hour really costs once everything is included.

Estimate Your Monthly Electricity Bill

Enter the usage from your bill — or your meter readings — plus the rate, fixed charge and tax. The full breakdown updates live. Fields accept plain numbers or formulas like 1200/4.

Your usage

The kilowatt-hours on your bill. The average US home uses about 900 kWh a month.

Most billing periods run 28–31 days. The daily cost is the total divided by this number.

Your rate and charges

The supply rate on your bill. The US average is about $0.17 per kWh; Hawaii and parts of New England are over $0.30.

The flat monthly fee for being connected — charged even in a month with no usage. Enter 0 if your bill has none.

Sales tax or utility tax on the subtotal. Some states exempt residential electricity — enter 0 if yours does.

The savings panel below prices this percentage cut in usage — the fixed charge stays the same, so the saving is smaller than the percentage suggests.

900 kWh at $0.1700 per kWh comes to $173.25 for the month — $153.00 for energy, $12.00 fixed charge and $8.25 tax.
$173.25 per month

Total for the billing period, including the fixed charge and tax. The effective rate is $0.1925 per kWh.

Bill breakdown

Usage900 kWh
Energy cost (900 kWh × $0.1700)$153.00
Fixed monthly charge$12.00
Subtotal$165.00
Tax (5%)$8.25
Total for the month$173.25
Effective rate per kWh$0.1925
Cost per day$5.78
Cost per year (daily × 365)$2,107.88

What a 10% usage cut would save

Usage saved90 kWh / month
New monthly usage810 kWh
New monthly total$157.19
Saved per month$16.06
Saved per year$195.46

Bill notes

  • This is a flat-rate estimate. Tiered rates, time-of-use pricing, demand charges and solar credits are not modeled — a bill on one of those tariffs can differ from this figure.

How Your Electricity Bill Is Worked Out

An electricity bill has three parts, and only the first is about how much power was used. The energy charge is the usage in kilowatt-hours multiplied by the rate per kWh — the part that moves when habits change. The fixed charge (also called the customer charge, service charge or basic service fee) is a flat monthly fee for being connected to the grid: the meter, the billing, the wires to the house. It is charged every month, even a month with no usage at all. The third part is tax, usually applied to the energy and the fixed charge together. So the whole bill is one short formula: total = (kWh × rate + fixed charge) × (1 + tax rate). Everything on this page follows from that formula, and the breakdown table above shows each line so the arithmetic can be checked in seconds.

Two derived figures matter more than most people expect. The effective rate is the total divided by the usage — what each kilowatt-hour really costs once the fixed charge and tax are spread across it. It is always higher than the advertised rate, and at low usage it can be far higher. The daily cost is the total divided by the number of days in the billing period, which is the honest way to compare a 28-day bill with a 33-day bill. Bills are rarely exactly 30 days, and comparing totals without dividing by days is one of the most common reasons a bill looks wrong when it is not.

Worked Example: A 900 kWh Month

Take a household that used 900 kWh in a 30-day billing period — close to the US average — at a rate of $0.17 per kWh, with a $12 fixed charge and 5% tax. Step by step: the energy charge is 900 × $0.17 = $153.00. Add the fixed charge: $153.00 + $12.00 = $165.00 before tax. The tax is 5% of $165.00, which is $8.25. The total is $165.00 + $8.25 = $173.25 for the month. The effective rate is $173.25 ÷ 900 = $0.1925 per kWh — about 13% above the $0.17 rate on the bill. The daily cost is $173.25 ÷ 30 = $5.78 a day, and the yearly projection is $5.78 × 365 = $2,107.88 a year if every month looked like this one. Cut usage by 10% — down to 810 kWh — and the new total is (810 × $0.17 + $12.00) × 1.05 = $157.19, a saving of $16.07 a month or $195.46 a year. Notice the saving is less than 10% of the bill: the fixed charge does not shrink when usage does.

The meter-reading route gives the same answer from different numbers. If the previous bill ended at 48,210 kWh and the meter now reads 49,110 kWh, usage is 49,110 − 48,210 = 900 kWh, and the rest of the math is identical. That subtraction is worth doing whenever a bill looks surprising: a misread meter, an estimated reading, or a billing period that stretched to 35 days can all move the total by more than any change in habits.

Why the Effective Rate Is Higher Than the Advertised Rate

The advertised rate is only the energy line. The fixed charge and the tax sit on top of it, and their weight depends on usage: the fewer kilowatt-hours the fixed charge is spread over, the heavier it feels. At the same $0.17 rate, $12 fixed charge and 5% tax, the numbers tell the story plainly.

Monthly usageEnergyTotal billEffective rate
100 kWh$17.00$30.45$0.3045 / kWh
300 kWh$51.00$66.15$0.2205 / kWh
900 kWh$153.00$173.25$0.1925 / kWh
2,000 kWh$340.00$369.60$0.1848 / kWh

At 100 kWh the effective rate is nearly double the advertised rate, because the $12 fixed charge is spread over only 100 units. At 2,000 kWh it is barely above the advertised rate. Two lessons follow. First, comparing the advertised rate with a neighbor's bill proves nothing — the effective rate is the comparable number. Second, a small household that uses little power pays a high price per unit no matter how careful it is, because the fixed charge is unavoidable. The only way to cut it is a tariff with a lower fixed charge, where one is offered.

Reading Your Meter and Your Bill

Every figure this calculator needs is on the bill, but bills bury them under different names. The usage is usually labelled "kWh used", "consumption" or "energy used", with the billing period dates beside it. The rate appears as "energy charge", "supply charge" or a per-kWh figure in the breakdown — if the bill splits supply and delivery into two per-kWh lines, add them together for the rate to enter here, or enter the supply rate and treat the delivery line as part of the fixed charge if it is a flat amount. The fixed charge hides under names like "customer charge", "basic service fee", "meter charge" or "service availability charge". Tax may be a single line or several (state, county, city) — add the percentages together. If the bill shows only a total, divide the total by the kWh for a rough all-in rate, but remember that figure already includes the fixed charge and tax, so it will read higher than the true per-kWh rate.

On a digital meter the reading is a plain number in kWh, usually cycling through on the display. On an old dial meter, read each dial left to right and record the number the pointer has just passed — a pointer sitting between 7 and 8 reads as 7. Take a photo of the meter on the same day each month and the subtraction stays honest. And check the reading type on the bill: an "estimated" reading is the utility's guess, not a measurement, and it is corrected on the next actual read — which is why one month can look impossibly high and the next impossibly low.

Common Mistakes That Inflate the Estimate

The most common mistake is confusing power with energy: a 1,500 W heater does not use 1,500 kWh a month — it uses 1.5 kWh per hour it runs, so 4 hours a day is 180 kWh a month. The second is forgetting the fixed charge entirely, which understates every bill and badly understates small ones. The third is using a blended rate — total divided by kWh — as the rate input: that double-counts the fixed charge and tax, because the calculator adds them again. The fourth is comparing months of different lengths without dividing by days: a 35-day bill is about 17% larger than a 30-day bill at identical daily use, and that alone explains many "the bill jumped" mysteries. The fifth is ignoring the season: heating and cooling dominate usage, so a January or July bill says little about April. A yearly projection from one summer month overstates the year, and one from a mild month understates it.

What Uses the Most Electricity at Home

Most of a bill comes from a short list. Heating and cooling are usually first — a central air conditioner at 3,500 W running 8 hours a day uses about 840 kWh in a month, and a space heater at 1,500 W running 4 hours uses 180 kWh. Water heating is second for many homes, and the always-on loads add up quietly: a second refrigerator or an old chest freezer can use 30–60 kWh a month each, and a gaming PC left running can use more than the refrigerator. The table below uses typical figures at $0.17 per kWh; the calculator on the appliance-cost page prices any single appliance exactly.

ApplianceTypical wattsHours / daykWh / monthCost / month
LED bulb9 W51.35$0.23
Refrigerator (modern)150 W8 effective36$6.12
Window air conditioner1,000 W8240$40.80
Space heater1,500 W4180$30.60
Electric clothes dryer3,000 W190$15.30
EV charger (Level 2)7,200 W2432$73.44

The pattern is clear: anything that makes heat or cold dominates, and anything that runs all day adds up even at low wattage. A single LED bulb costs about 23 cents a month; one space heater costs more than a hundred bulbs. That is why the savings panel above prices a percentage cut in total usage rather than a single swap — the thermostat, the water heater and the second fridge are where the money is, and the bulbs are where it is not.

My saved numbers reuse them in any calculator

Save a number once — like your rent or hourly rate — then just type its name instead of the number, in any calculator here. You can also type formulas like 5000 * 1.1 right into any box.

    Saved only in this browser — nothing is sent to us.

    Estimate only — not a bill from your utility. Real bills can include tiered or time-of-use rates, demand charges, delivery riders, credits and minimum bills. Always check the rate schedule on your own bill.

    Frequently Asked Questions

    How is an electricity bill calculated?

    In three steps. First the energy charge: usage in kilowatt-hours multiplied by the rate per kWh. Then the fixed monthly service charge is added — the flat fee for being connected, which is charged even in a month with no usage. Then tax is applied, usually to the energy plus the fixed charge together. Total = (kWh × rate + fixed charge) × (1 + tax rate). A household using 900 kWh at $0.17 per kWh with a $12 fixed charge and 5% tax pays $153.00 + $12.00 = $165.00 before tax, $8.25 tax, and $173.25 in total.

    What is a kilowatt-hour (kWh)?

    A kilowatt-hour is the unit utilities bill by: one kilowatt of power used for one hour. A 1,000-watt appliance running for one hour uses 1 kWh; a 100-watt bulb running for 10 hours uses the same 1 kWh. Your meter records energy (kWh), not power (kW) — which is why the bill multiplies the kWh on the meter by the rate per kWh, not the wattage of your appliances.

    Where do I find my rate per kWh and fixed charge?

    On the bill itself, in the charges breakdown — look for "energy charge", "supply" or "delivery" per kWh, and a line called "customer charge", "service charge" or "basic service fee". The rate is the supply rate if your bill splits supply and delivery; if it shows a single blended rate, use that. If the bill only shows a total, divide the total charge by the total kWh for a rough all-in rate — but that already includes the fixed charge and tax, so it will read higher than the true per-kWh rate.

    Why is my bill higher than usage times rate?

    Because usage times rate is only the energy line. The fixed monthly charge is added on top, and then tax is charged on the combined amount — so the real cost per kWh (the effective rate) is always higher than the advertised rate. At 900 kWh, $0.17 per kWh, a $12 fixed charge and 5% tax, the bill is $173.25, or $0.1925 per kWh — about 13% above the $0.17 rate. At low usage the gap is much bigger: at 100 kWh the same fixed charge and tax push the effective rate to about $0.30 per kWh.

    How do I work out usage from meter readings?

    Subtract the previous reading from the current reading — both in kWh, straight off the meter or off two consecutive bills. If the last bill ended at 48,210 kWh and the meter now reads 49,110 kWh, usage is 49,110 − 48,210 = 900 kWh. Switch this calculator to meter-reading mode and it does the subtraction for you. If the meter has dials rather than digits, read each dial in order and record the number the pointer has just passed.

    What is the average US electricity bill?

    The U.S. Energy Information Administration reports average residential use of about 900 kWh a month. At the national average rate of around 17 cents per kWh, the energy alone is about $150 a month — and with a typical fixed charge and tax, most households land near $165–$180 a month. Rates vary widely by state, from roughly 13 cents per kWh in the cheapest states to over 30 cents in Hawaii and parts of New England, so your own bill is the only rate that matters for your estimate.

    How can I lower my electricity bill?

    Cut the kWh, because the fixed charge is the same whatever you use. The biggest wins are usually heating and cooling (a degree or two on the thermostat), water heating (shorter showers, lower tank temperature), and the always-on loads — a second refrigerator, an old freezer, or a gaming PC left running. The savings panel above prices a percentage cut for you: trimming 10% off 900 kWh saves about $16 a month, or about $195 a year. LED bulbs help, but one bulb swapped saves only a few dollars a year — the thermostat and the water heater are where the money is.

    Related Calculators

    Last reviewed: November 9, 2026 · Formulas verified for accuracy.