kWh to kW Calculator
A bill shows energy used, not the power drawn. Enter the energy in kilowatt-hours and the time it was used over to get the average power in kilowatts — plus watts, the cost at your rate, and the current it draws at your voltage.
Convert Kilowatt-Hours to Kilowatts
Enter the energy and the time it was used over — the average power updates live, with the current in amps. Fields accept plain numbers or formulas like 6000/1000.
Energy and time
The total energy used. 6,000 Wh is 6 kWh; a 900 kWh month is the average US household.
Watt-hours are divided by 1,000 to get kilowatt-hours before the power is worked out.
The same 6 kWh over 4 hours is 1.5 kW; over 24 hours it is only 0.25 kW. Time decides the answer.
120 V for household mains, 240 V for large appliances, 12 V or 48 V for low-voltage DC.
The US average is about $0.17 per kWh. Leave it at 0 if you only want the power, not the cost.
Average power: 1,500 W, drawing 12.50 A at 120 V. That energy costs $1.02 at $0.1700 per kWh.
Power and cost
| Energy | 6.000 kWh (6,000 Wh) |
| Time | 4.00 hours |
| Average power | 1.500 kW |
| Average power in watts | 1,500.0 W |
| Current at 120 V | 12.50 A |
| Cost of the energy | $1.02 |
Conversion notes
- The result is the average power over the period entered. Peak power can be much higher for loads that cycle on and off — use nameplate or peak power for breaker and wire sizing, never the average.
- The amps figure assumes a single-phase resistive load. Motors and other inductive loads draw a little more current than watts ÷ volts suggests, because the power factor is below 1.
Results copied to your clipboard.
Kilowatt-Hours vs Kilowatts: Energy Is Power Over Time
A bill shows energy used, not the power drawn — and the two are different quantities joined by time. A kilowatt-hour (kWh) is energy: one kilowatt of power sustained for one hour. A kilowatt (kW) is power: the rate at which energy is used at any moment. To go from the energy on the bill back to the power that produced it, divide by the time: average power = energy ÷ time. Using 6 kWh over 4 hours means an average power of 6 ÷ 4 = 1.5 kW. The same 6 kWh over 1 hour would be 6 kW, and over a whole day only 0.25 kW. The energy alone never answers the question — the hours decide it.
That is why a monthly bill cannot be turned into a power rating without the days: a 900 kWh month is 900 ÷ 720 = 1.25 kW on average, even though the house contains appliances rated at ten times that. The average smooths out every peak and every idle hour into a single flat rate, which is exactly what the bill sees and exactly what this calculator returns.
The Formula: Power = Energy ÷ Time
The conversion is a single division: P(kW) = E(kWh) ÷ t(h). If the energy is given in watt-hours, divide by 1,000 first — 6,000 Wh is 6 kWh — because the formula needs kilowatt-hours. If the time is in minutes, divide by 60 first. The result in watts is the kilowatts times 1,000. And the current follows from the power and the voltage: current in amps = power in watts ÷ voltage in volts, for a single-phase resistive load. A 1,500 W load on a 120 V circuit draws 12.5 A; on a 240 V circuit it draws 6.25 A. The cost, when a rate is entered, is simply the energy times the rate — the power itself never enters the price.
Worked Example: 6 kWh Over 4 Hours
Take 6 kWh of energy used over 4 hours, at $0.17 per kWh and 120 V. Step by step: the average power is 6 ÷ 4 = 1.5 kW, or 1,500 W. The current is 1,500 ÷ 120 = 12.5 A. The cost is 6 × $0.17 = $1.02. Change the time and the answer moves: the same 6 kWh over 1 hour is 6 kW and 50 A — a load that would trip a 20-amp breaker — while over 24 hours it is 0.25 kW and about 2.08 A, the draw of a couple of light bulbs. The energy is identical in all three cases; only the time changes, and the time is what turns energy into power.
Average Power vs Peak Power
The figure this calculator returns is the average over the period entered, and the average can hide a great deal. A heater that cycles on for 15 minutes and off for 45 draws 1.5 kW while it runs but averages 0.375 kW over the hour. A washing machine heats at 2 kW for a few minutes, then spins at a few hundred watts for the rest of the cycle. A refrigerator compressor starts with a surge several times its running current. For the bill, the average is the right number — the meter integrates energy, not peaks. For breaker and wire sizing, the average is the wrong number: use the nameplate or peak power instead, because the breaker must survive the surge and the wire must carry the peak current without overheating. Confusing the two is how circuits get undersized.
Reading a Bill Backwards
This conversion is the way to read a bill backwards. A 900 kWh month over 30 days is 30 kWh a day, which is an average power of 30 ÷ 24 = 1.25 kW — the whole household, averaged over every hour of the month, draws about as much as a single space heater. A day with 60 kWh is 2.5 kW on average, and a day with 15 kWh is 0.625 kW. Comparing days this way strips out the effect of month length and shows whether the house itself is using more power, or whether the bill simply covered more days. And when a single appliance is the question, the same division on the appliance's own meter reading gives its average draw — the number that decides what it costs to run, and what circuit it needs.
Common Mistakes in the kWh to kW Conversion
The most common mistake is converting without a time period at all — "how many kW is 6 kWh?" has no answer until the hours are known, and any number quoted without them is a guess. The second is dividing by days instead of hours: 6 kWh over 4 hours is 1.5 kW, not 6 ÷ 4 days. The third is using the average for sizing: a 1.5 kW average can come from a 6 kW peak, and a breaker sized for the average will trip on the peak. The fourth is forgetting the watt-hour division: 6,000 Wh is 6 kWh, and dividing 6,000 by the hours without converting gives a figure a thousand times too large. The fifth is the amps shortcut on motors: watts ÷ volts gives the current only for a resistive load, and a motor with a power factor of 0.8 draws 25% more current than the division suggests.
My saved numbers reuse them in any calculator
Save a number once — like your rent or hourly rate — then just type its name instead of the number, in any calculator here. You can also type formulas like 5000 * 1.1 right into any box.
Saved only in this browser — nothing is sent to us.
Frequently Asked Questions
What is the formula to convert kWh to kW?
Power in kilowatts = energy in kilowatt-hours ÷ time in hours: P(kW) = E(kWh) ÷ t(h). Using 6 kWh over 4 hours means an average power of 6 ÷ 4 = 1.5 kW. If the energy is given in watt-hours, divide by 1,000 first: 6,000 Wh is 6 kWh, so the same run is 6 ÷ 4 = 1.5 kW. The conversion is a single division — but it only works when the time is known.
Why do I need the time to convert kWh to kW?
Because energy and power are different quantities, and time is what links them. 6 kWh on its own says nothing about power: used in 1 hour it is 6 kW, used in 4 hours it is 1.5 kW, used over a whole day it is 0.25 kW. Without a time period there is no single answer, which is why the calculator asks for hours. A conversion that skips the time is always wrong.
Is the result the peak power or the average power?
The average power over the period you entered. A device that runs in bursts — a heater cycling on and off, a washing machine heating then spinning — can draw far more than the average at its peak moments and nothing at all between them. The average is what the bill sees and what this calculator returns. For breaker and wire sizing, use the peak or nameplate power instead, never the average.
How is the current in amps worked out?
From power and voltage: current in amps = power in watts ÷ voltage in volts, for a single-phase resistive load. A 1,500 W load on a 120 V circuit draws 1,500 ÷ 120 = 12.5 A; on a 240 V circuit it draws 6.25 A. Change the voltage above to match your supply. For motors and other inductive loads the real current is a little higher, because the power factor is below 1.
How many kW is 6 kWh?
There is no fixed answer — it depends on the hours. Over 4 hours, 6 kWh is 1.5 kW. Over 1 hour it is 6 kW; over 12 hours it is 0.5 kW; over 24 hours it is 0.25 kW. Anyone quoting a kW figure from a kWh figure without a time period is guessing. Enter your hours above and the calculator gives the exact average for your case.
What is the difference between kWh and kW?
A kilowatt (kW) is power — how fast energy is used at any moment. A kilowatt-hour (kWh) is energy — power sustained over time. A 1.5 kW heater draws 1.5 kW while it runs; after 4 hours it has consumed 6 kWh. The bill charges for kWh, because that is the total energy supplied; the kW rating only describes how quickly an appliance can consume it.