kW to kWh Calculator

Power and energy are different quantities, and the bill charges for energy. Enter power in kilowatts and the running time in hours to get the energy in kilowatt-hours — plus watt-hours, megajoules, the cost at your rate, and monthly and yearly totals.

Convert Kilowatts to Kilowatt-Hours

Enter the power and the running time — the energy updates live, with the cost at your rate. Fields accept plain numbers or formulas like 1500/1000.

Power and time

The rated power. A 1,500 W heater is 1.5 kW; a 60 W bulb is 0.06 kW.

Watts are divided by 1,000 to get kilowatts before the energy is worked out.

Decimals are fine: 30 minutes is 0.5 hours, 15 minutes is 0.25 hours.

The US average is about $0.17 per kWh. Leave it at 0 if you only want the energy, not the cost.

1.500 kW running for 4.00 hours uses 6.000 kWh of energy, costing $1.02.
6.00 kWh

Energy used: 6,000 Wh, or 21.60 MJ. At $0.1700 per kWh, that costs $1.02.

Energy and cost

Power1.500 kW (1,500 W)
Time4.00 hours
Energy6.000 kWh
Energy in watt-hours6,000 Wh
Energy in megajoules21.60 MJ
Cost for this run$1.02
If repeated daily — monthly energy180.0 kWh
If repeated daily — monthly cost$30.60
If repeated daily — yearly energy2,190 kWh
If repeated daily — yearly cost$372.30

Conversion notes

  • Real appliances rarely draw their rated power continuously — heaters cycle, motors vary with load — so metered energy can differ from the nameplate calculation.
  • Monthly and yearly figures assume the same run repeats every day. For a one-off run, read the single-run figure instead.

Kilowatts vs Kilowatt-Hours: Power Is a Rate, Energy Is a Total

The confusion between kW and kWh is the most common mistake in home energy math, and it starts with the units. A kilowatt (kW) is power — the rate at which energy is used, right now. A kilowatt-hour (kWh) is energy — power sustained over time. The two are linked by time, and only by time: energy = power × time. A 1.5 kW heater draws 1.5 kW whenever it is on; run it for 4 hours and it has used 6 kWh of energy. The utility bills energy (kWh) because that is what it actually supplies; the kW rating only says how fast an appliance can use it. A light bulb and a toaster make the difference concrete: a 60 W bulb left on for 10 hours uses 0.6 kWh, while a 1,500 W toaster run for 6 minutes uses 0.15 kWh — the toaster is 25 times more powerful, but the bulb uses four times more energy, because it runs a hundred times longer.

That is also why "kW per hour" is a meaningless phrase: kilowatts already are a rate, so "per hour" adds nothing. What people usually mean is either kW (the power right now) or kWh (the energy over the hour). Keeping the two apart makes every other number on the bill fall into place.

The Formula: Energy = Power × Time

The conversion is a single multiplication: E(kWh) = P(kW) × t(h). If the power is given in watts, divide by 1,000 first, because a kilowatt is 1,000 watts: a 1,500 W heater is 1.5 kW. If the time is in minutes, divide by 60: 30 minutes is 0.5 hours, 15 minutes is 0.25 hours. Two companion units appear alongside the result. Watt-hours are the same energy in smaller units — multiply kWh by 1,000 — and are used for small devices, where 0.3 kWh reads more naturally as 300 Wh. Megajoules are the SI unit: one kilowatt-hour is exactly 3.6 megajoules, because 1 kW is 1,000 joules per second and an hour is 3,600 seconds. Engineers quote energy in megajoules; utilities quote it in kilowatt-hours; the two are the same quantity in different units.

Worked Example: A 1,500 W Heater for 4 Hours

Take a space heater rated at 1,500 W, run for 4 hours, with electricity at $0.17 per kWh. Step by step: convert the power to kilowatts, 1,500 ÷ 1,000 = 1.5 kW. Multiply by the time: 1.5 × 4 = 6 kWh of energy — or 6,000 Wh, or 21.6 MJ. The cost is 6 × $0.17 = $1.02 for the run. If the same 4 hours repeat every day, the monthly energy is 6 × 30 = 180 kWh, costing $30.60, and the yearly energy is 6 × 365 = 2,190 kWh, costing $372.30. The monthly and yearly lines assume the daily pattern repeats — for a one-off run, the single-run figure is the one that matters.

Common Appliances: Power, Hours and Energy

The same multiplication prices any appliance once the label wattage and the hours are known. The table below uses typical figures at $0.17 per kWh, with realistic daily hours — a refrigerator's compressor cycles, so its 8 hours are effective running hours, not plug-in hours.

AppliancePowerHours / daykWh / dayCost / day
LED bulb9 W50.045$0.01
LED TV (55")100 W50.50$0.09
Laptop65 W60.39$0.07
Refrigerator (modern)150 W8 effective1.20$0.20
Microwave1,100 W0.250.28$0.05
Window air conditioner1,000 W88.00$1.36
Space heater1,500 W46.00$1.02
Electric clothes dryer3,000 W13.00$0.51
EV charger (Level 2)7,200 W214.40$2.45

The pattern is that watts and hours matter equally: the 9 W bulb costs about a cent a day, while the heater costs a dollar — a hundred times more — because it draws 167 times the power for nearly as many hours. And the EV charger shows why the bill can jump: 14.4 kWh a day is more than a whole household's lighting, TV and laptop combined.

Common Mistakes in the kW to kWh Conversion

The most common mistake is forgetting to divide watts by 1,000, which makes the answer a thousand times too big: a 1,500 W heater is 1.5 kW, not 1,500 kW. The second is entering minutes as hours — 30 minutes is 0.5 hours, not 30 hours. The third is using the nameplate wattage for an appliance that cycles: a refrigerator rated at 150 W does not draw 150 W all day, because the compressor switches off — the US Department of Energy suggests using about a third of the plugged-in hours for refrigerators. The fourth is treating the monthly projection as a meter reading: it assumes the same run every day, and real months vary with the seasons. The fifth is the reverse confusion — reading the kWh figure on the bill as the power drawn, when it is the energy used over the whole month. A 900 kWh month is an average power of only 900 ÷ 720 = 1.25 kW, even though the house has appliances rated at ten times that.

From Energy to the Bill

The kWh figure this calculator produces is exactly the quantity the bill charges for. Multiply it by the rate per kWh and the cost appears — that is the energy line of the bill, before the fixed charge and tax. The bill calculator on this site takes the same kWh figure and adds those lines, so the two tools chain together: work out the energy of each appliance here, add the kWh figures together for the month, and the bill calculator turns the total into the dollars that arrive in the post. That chain is also the honest way to estimate a bill before the meter is read — appliance by appliance, hours by hours, with the arithmetic visible at every step.

My saved numbers reuse them in any calculator

Save a number once — like your rent or hourly rate — then just type its name instead of the number, in any calculator here. You can also type formulas like 5000 * 1.1 right into any box.

    Saved only in this browser — nothing is sent to us.

    Estimates for planning only. Real appliances rarely draw their rated power continuously — heaters cycle, motors vary with load — so metered energy can differ from the nameplate calculation. Check your own meter or bill for the figure that matters.

    Frequently Asked Questions

    What is the difference between kW and kWh?

    A kilowatt (kW) is power — the rate at which energy is used, right now. A kilowatt-hour (kWh) is energy — power sustained over time. A 1.5 kW heater draws 1.5 kW whenever it is on; run it for 4 hours and it has used 6 kWh of energy. Utilities bill energy (kWh) because that is what they actually supply; the kW rating only says how fast an appliance can use it.

    What is the formula to convert kW to kWh?

    Energy in kilowatt-hours = power in kilowatts × time in hours: E(kWh) = P(kW) × t(h). A 1.5 kW heater running 4 hours uses 1.5 × 4 = 6 kWh. If the power is given in watts, divide by 1,000 first: a 1,500 W heater is 1.5 kW, so the same run is 1.5 × 4 = 6 kWh. There is no other step — the conversion is a single multiplication.

    How many kWh does a 1,500 W heater use in a day?

    It depends on the hours, not the day: 1.5 kW × hours run. Run it 4 hours and it uses 6 kWh; run it 8 hours and it uses 12 kWh; leave it on all day and it uses 36 kWh. At 17 cents per kWh, 4 hours costs about $1.02 a day, or about $30.60 a month if the same 4 hours repeat every day. The wattage sets the speed; the hours set the total.

    Why do I divide watts by 1,000?

    Because the energy unit is the kilowatt-hour, and a kilowatt is 1,000 watts. The formula needs power in kilowatts, so watts must be converted first: kW = W ÷ 1,000. A 60 W bulb is 0.06 kW; over 5 hours it uses 0.06 × 5 = 0.3 kWh. Forgetting the division is the most common mistake in this conversion — it makes the answer 1,000 times too big.

    How does the monthly total work?

    It assumes the same run repeats every day: monthly energy is the single-run kWh multiplied by 30, and yearly by 365. That is right for a daily habit — a heater run 4 hours every evening, a TV on 5 hours a night. For a one-off run, ignore the monthly line and read the single-run figure instead. Real months vary with the seasons, so treat the monthly figure as a planning estimate, not a meter reading.

    What is a megajoule, and why show it?

    A joule is the SI unit of energy, and a megajoule is a million joules. One kilowatt-hour equals exactly 3.6 megajoules, because 1 kW is 1,000 joules per second and an hour is 3,600 seconds (1,000 × 3,600 = 3,600,000 J). The megajoule is shown for physics and engineering work, where energy is usually quoted in joules rather than the billing unit of kWh.

    Related Calculators

    Last reviewed: November 9, 2026 · Formulas verified for accuracy.